Engineering 1934 Jan-Jun: Index: Literature

Engineering 1934 Jan-Jun: Index: Literature

Engineering 1934 Jan-Jun: Index: Literature

Engineering 1934 Jan-Jun: Index: Literature

Note: This is a sub-section of Engineering 1934 Jan-Jun: Index

• View 1934 Jan-Jun Volume

LITERATURE INDEX

• ACCIDENT Prevention, Building and Allied Trades, 208
• Acetate, Cellulose, Manufacture and Applications, by A. G. Lipscomb, 208
• Administration, Office, for Manufacturers, by R. A. Mills, 394
• Aero-Engine Crankshafts, Damping of Torsional Vibrations, by Prof. J. L. Mansa, 529
• Aeronautics, Bulletin No. 10, Research Institute of Warsaw, 475
• Africa, South and East, Year Book, Edited by A. S. and G. G. Brown, 424
• Air Conditioning, Ventilating and Heating, by L. A. Harding and A. C. Willand, 208
• Air Transport Manual, by Staff of “ Commercial Motor,” 450
• Air Travel and Commercial Air Transport, 150
• Aircraft, All the World’s, Jane’s, 1933, Edited by C. G. Grey and L. Bridgman, 21
• Aircraft Timber, Standard Nomenclature, 474 Almanac, British Journal Photographic, 357
• Almanacs and Calendars, 21, 82, 132, 300, 352, 402, 489
• Alternating-Current Circuits, by M. P. Wein- bach, 617
• Aluminium and its Alloys, by N. F. Bugden, 481
• America, South, Handbook of, 1934, 565
• Annali della Vasca Nazionale per le Esperienze di Architettura Navale in Roma, Vol. II, 335
• Annuals and Reference Books, 21, 82,132, 300, 357, 412, 424, 498, 565, 633, 718
• Arte e Tecnica nella Evoluzione dei Ponti, by Eng.-Prof. L. Santarella, 595
• Atmospheric Pollution by Smoke, by Dr. J. R. Ashworth, 632
• Automobiles and Rubber, by C. Macbeth, 20 Automotive Engines, by P. M. Heldt, 590

• B.B.C. YEAR BOOK, 68
• Berechnung Gegliederter Knickstabe, by Dr.- Ing. D. Ruhl, 211
• Bestimmung der Dampfung von Drehschwing-ungen einer Flugmotorkurbelwelle, by Prof. J. L. Mansa, 529
• Biochemistry of Nitrogen Conservation, Introduction to, by Dr. G. J. Fowler, 534
• Blue Book, Electrical Trades Directory and Handbook, 412
• Boiler Scale, its Physical Chemistry and its Prevention, by R. Stumper, 475
• Books, New, Notes on, 32, 208, 335, 475, 529, 538, 584, 595, 632
• Books Received, 38, 94,176, 222, 264, 292, 320, 348, 376, 402, 428, 458, 488, 514, 542, 570, 598, 624, 650, 676, 704, 730
• Brass Casting, 321
• Breakdowns, Electrical, Avoidance of, 66
• Bridges, Art and Technique in Evolution of, by Eng.-Prof. L. Santarella, 595
• Bridge Design, Reinforced-Concrete, by C. S.
• Chettoe and H. 0. Adams, 504
• British Corporation Register of Ships, 1934, 498
• British Journal Photographic Almanac, 357
• Broadcasting, Transmission and Reception Developments, 68
• Buckling Stresses in Lattice Members, by Dr.- Ing. G. Ruhl, 211
• Building and Allied Trades, Accident Prevention in, 208
• Building Construction, Strength of Materials, by K. Zillich, 32
• Buildings, Heating, Ventilating and Air Conditioning, by L. A. Harding and A. C. Will- and, 208
• Buildings, Steel Mill, Design of, and Calculation of Stresses in Framed Structures, by Dr. M. S. Ketchum, 140
• Buildings, Steelwork under the L.C.O. Code of Practice, by D. H. Lee, 538

• CALCULATING Machines, Principles and Evolution, by L. Couffignal, 538
• Calculator, Wages, 47-Hours, Wakelin’s, 335 Calendars and Almanacs, 21, 82, 132, 300, 352, 402, 489
• Calorimetry, Gas, by Major C. G. Hvde and
• F. E. Mills, 140
• Cast Iron, Nickel, To-Day, 538
• Catalytic Action of Surfaces, by J. E. Nyrop, 577
• Catalytic Oxidation of Organic Compounds in the Vapour Phase, by L. F. Marek and Dr. Dorothy A. Hahn, 20
• Cellulose Acetate, Manufacture and Applications, by A. G. Lipscomb, 208
• Ceramic Materials, Behaviour under Permanent Tensile Stress, by Dr.-Ing. F. Heumann, 335 Chemical Engineering, Rubber in, by Dr. H.P.
• Stevens and M. B. Donald, 32'
• Chemistry, Catalytic Oxidation of Organic Compounds in the Vapour Phase, by L. F. Marek and Dr. Dorothy A. Hahn, 20
• Chemistry, Inorganic, Abegg, Vol. IV, Part 3, Iron and its Compounds, 32
• Chemistry, Inorganic and Theoretical, Comprehensive Treatise on, Vol. XII, by Dr. J. W. Mellor, 20
• Chemistry, Organic, Treatise on, Vols. I and II, by A. E. Tchitchibabine, 139
• Chemistry, Physical, and Prevention of Boiler Scale, by R. Stumper, 475
• Chromium Plating, by Prof.-Dr. E. H. O. Bauer, Prof. H. Arndt and Dr.-Ing. W. Krause, 633
• Cin&natographie Jusqu’a 12,000 Vues Par Seconde (Avec Application a l’Etude du Vol des Insectes), 32
• Cinematography, Commercial, by G. H. Sewell, 32
• Cinematography, Ultra-Rapid, Early Experiments, 32
• Cinematography up to 12,000 Pictures per Second, with Applications to the Study of the Flight of Insects, 32
• Circuits, Alternating-Current, by M. P. Wein- bach, 617
• Clubs, English, in All Parts of the World, Edited by E. C. Austen-Leigh, 357
• Colliery Guide, Handy, Reid’s, 424 Commutators and Rectifiers, by H. Giroz, 255
• Competitive Design of Steel Structures, by P. Russell and G. Dowell, 480
• Concrete Frames, Continuous Reinforced, by H. Cross and N. D. Morgan, 577
• Concrete, Reinforced, Vol. I., by C. Kersten, 595
• Concrete Work in Winter, by Prof. Dr.-Ing. A. Kleinlogel, 284
• Conjugate Functions for Engineers, by M. Walker, 534
• Construction Work, Machines and Tools in, by E. Wolfer, 451
• Contribution a l’Etude des Courants Liquides, by Dr. H. Favre, 32
• Crankshafts, Aero-Engine, Damping of Torsional Vibrations, by Prof. J. L. Mansa, 529
• Crankshafts with Minimum Mass Momentum for In-Line Motors, by Dr.-Ing. H. Schron, 538
• Crystalline State. Vol. I. A General Survey, by W. L. Bragg, 617

• DEEP-SEA Salvage, by A. G. Whyte and R. L. Hadfield, 577
• Diaries, Pocket Books, &c., 21, 82, 132, 412 Diesel Reference Guide, by J. Rosbloom, 481 Differences and Functions, Tables of, by Prof. K. Hayashi, 584
• Directory and Handbook, Electrical Trades. The Blue Book, 412
• Directory and Handbook, Water Engineer’s, 1934, 565
• Directory of Merchants, Manufacturers and Shippers of the World, 1934, 718
• Directory of Shipowners, Shipbuilders and Marine Engineers, 1934, 565
• Directory, Who’s Who, 412
• Distribution and Transmission, Electrical, by E. T. A. Rapson, 367
• Drawing and Descriptive Geometry, Engineering, by F. W. Bartlett and T. W. Johnson, 255
• Drawing, Isometric and Orthographic, by J. H. Pritchard, 20
• Dynamics, by Dr.-Ing. A. Foppl, 367

• EDUCATION, Works Management, with Special Reference to the Case System, 451
• Educational Experiments in Industry, by N. Peffer, 538
• Eisenbetonbau, Vol. I., by C. Kersten, 595 Electric Power, Part II, Descriptive Catalogue, Science Museum, South Kensington, by W. T. O’Dea, 475
• Electric Welding, Metallic-Arc Process, by R. C. Stockton, 208
• Electrical Breakdowns, Avoidance of, 66
• Electrical Circuits, Alternating-Current, by M. P. Weinbach, 617
• Electrical Measurements, Advanced, by Drs. W. R. Smythe and W. C. Michels 212
• Electrical Trades Directory and Handbook. The Blue Book, 412
• Electrical Transmission and Distribution, by E. T. A. Rapson, 367
• Electrical Undertakings, Garcke’s Manual of, 132
• “Electrician” Annual Tables of Electricity Undertakings, 47th Edition, 633
• Electricity, Grid Scheme, Inception and Operation, Review of, by W. Fennell, 595
• Electricity, Transformation of Energy. II. Commutators and Rectifiers, by H. Giroz, 255
• Electrotechnics, Principles of Direct and Alternate Currents, by F. Moeller and G. Bolz, 589
• Engine, Aero-, Crankshafts, Damping of Torsional Vibrations, by Prof. J. L. Mansa, 529
• Engines, Automotive, by P. M- Heldt, 590
• Engines, Heat, Application of Thermodynamics to, by E. H. Lewitt, 285
• Engines, High-Speed Compression-Ignition, Lubrication of, 13
• Engines, Internal-Combustion, by J. A. Polson, 505
• Engines, Internal-Combustion, High-Speed, Testing of, by A. W. Judge, 617
• Engines, Internal-Combustion, Theory and Design, by V. L. Maleev, 534
• Engine, Steam, Theory and Practice, Ripper’s, by Dr. W. J. Goudie, 451
• Engineering Descriptive Geometry and Drawing, by F. W. Bartlett and T. V. Johnson, 255
• Engineering Shop Practice. Vol. I, by O. W. Boston, 590

• FERRO-CONCRETE Bridge Design, -by C. S. Chettoe and H. C. Adams, 504
• Ferro-Concrete Construction, Vol. I, by
• C. Kersten, 595
• Ferro-Concrete Frames, Continuous, by H. Cross and N. D. Morgan, 577
• Ferro-Concrete Work in Winter, by Prof. Dr.- Ing. A. Klimlogel, 284
• Film-Making, Commercial Cinematography, by G. H. Sewell, 32
• Fitch, John, Steamboat Pioneer, by P. Augustin- Normand, 584
• Fluid Currents, a Study on, by Dr. H. Favre, 32
• Framed Structures, Calculation of Stresses in, by Dr. M. S. Ketchum, 140
• Frames, Continuous, of Reinforced Concrete, by H. Cross and N. D. Morgan, 577
• Functions, Conjugate, for Engineers, by M. Walker, 534
• Functions and Differences, Tables of, by Prof. K. Hayashi, 584

• GARCKE’S Manual of Electrical Undertakings, 132
• Gas Analysis by Measurement of Thermal Conductivity, by Dr. H. A. Daynes, 366
• Gas Calorimetry, by Major C. G. Hyde and F. E. Mills, 140
• Geometry, Descriptive, and Engineering, Drawing, by F. W. Bartlett and T. W. Johnson, 255
• Geometry, Descriptive, Principles of, by Dr. E. L. Ince, 284
• Graphs of Standard Mathematical Functions, by H. V. Lowry, 255
• Great Western Railway Ports, 377
• Grid Scheme, Inception and Operation, Review of, by W. Fennell, 595
• Grundlagen des Stahlbaues, Edited by G. Schaper, 140
• Guide, Press, Willing’s, 21, 718
• Gyroscopic Stabilisation of Land Vehicles, by Dr. J. F. S. Ross, 394

• HANDBOOK, South American, 1934, 565
• Handbuch der Anorganischen Chemie, Abegg, Vol. IV, Part 3, Iron and its Compounds, 32
• Handbuch der Experimentalphysik. Vol. IV. Hydro-und Aerodynamik. Part 4. Rohre, Offene Gerinne, Zahigkeit, 577
• Heat Engines, Application of Thermodynamics to, by E. H. Lewitt, 285
• Heating, Ventilating and Air Conditioning, by
• L. A. Harding and A. C. Willand, 208
• Hydraulics, Contribution to the Study of Fluid Currents, 32

• IL BACINO Imbrifero Dell’ Ofanto, by Dott. Ing. R. Tramonte, 284
• Induction Motors, Modem Polyphase, by F. Punga and O. Roydt, 534
• Industrial Management, Principles of, by Prof.
• E. A. Allcut, 632
• Industrial Towns and Smoke Pollution, by Dr. J. R. Ashworth, 632
• Industry, Educational Experiments in, by N. Peffer, 538
• Institut des Recherches l’Afironautique, Warsaw, Bulletin No. 10, 475
• Institute of Marine Engineers, Papers on Running and Maintenance of Marine Machinery, 335
• Internal-Combustion Engines. See Engines
• Iron and its Compounds, Part 3, Vol. IV, Abegg’s Inorganic Chemistry, 32
• Irrigation, Ofanto River Regulation, by Dott.- Ing. R. Tramonte and G. Passarella, 284
• Isometric and Orthographic Drawing, by J. H. Pritchard, 20
• Italy, Ofanto River Regulation, by Dott.-Ing. R. Tramonte and G. Passarella, 284
• Italy, Tank Experiments on Ship Models, Rome, 1932, 335

• JANE’S All the World’s Aircraft, 1933, Edited by C. G. Grey and L. Bridgman, 21
• Jane’s Fighting Ships, 1933. 82

• KELLY’S Directory of Merchants, Manufacturers, and Shippers of the World, 1934, 718
• Kurbelwellen mit kleinsten Massenmomenten fur Reihenmotoren, by Dr. H. Schron, 538 LATTICE Members, Buckling Stresses in, by
• Dr.-Ing. D. Ruhl, 211
• Leitfaden der Elektrotechnik. Vol. I, Parts 1 and 2. Grundlagen des Gleich- und Wechsel- stromes, by F. Moeller and G. Bolz, 589
• Lubrication, High-Speed Compression-Ignition Engines, 13

• MACHINE Shop Practice. Vol. I, by O. W. Boston, 590
• Machines a Calculer, leurs Principes, leur Evolution, by L. Couffignal, 538
• Machines and Tools in Construction Work, by E. Wolfer, 451
• Management, Industrial, Motion and Time Study, Edited by A. H. Mogensen, 585
• Management, Industrial, Principles of, by
• Prof. E. A. Allcut, 632
• Management, Works, Education for, with Special Reference to the Case System, 451
• Manufacturers, Merchants and Shippers of the
• World, Kelly’s Directory, 1934, 718 Manufacturers, Office Administration for, by
• R. A. Mills, 394
• Marine Engineering, Shipping and Shipbuilding,
• Annual Review, 94
• Marine Engineers, Shipowners and Shipbuilders, Directory, 1934, 565
• Marine Machinery, Running and Maintenance, Institute of Marine Engineers’ Papers, 335 Maschinen- und Geratepark im Baubetrieb, by
• E. Wolfer, 451
• Materials, Engineering; Properties and Testing, by Dr.-Ing. O. Schwarz, 139
• Materials, Strength of, by J. P. Kottcamp and
• A. C. Harper, 20
• Materials, Strength of, by K. Zillich, 32 Mathematical Functions, Standard, Graphs of,
• by H. V. Lowry, 255
• Mathematics, Conjugate Functions for Engineers, by M. Walker, 534
• Mathematics, Tables of Differences and Functions, by Prof. K. Hayashi, 584
• Measurements, Electrical, Advanced, by Drs.
• W. R. Smythe and W. C. Michels, 212 Measurements, Technical, for Workshop Processes, &c., by Dr.-Ing. A. Gramberg, 394 Mechanical Pocket Book and Diary, “ Practical
• Engineer,” 1934, 82 “Mechanical World ” Year Book, 1934, 300 Mechanics, Applied. IV. Dynamics, by Dr.-
• Ing. A. Foppl, 367
• Mechanics, Railway, Introduction to, by Prof.
• G. V. Lomonossoff, 475
• Mechanics, Rayleigh’s Principle and its Application to Engineering, by Drs. G. Temple and
• W. G. Bickley, 589
• Merchants, Manufacturers and Shippers of the World, Kelly’s Directory, 1934, 718
• Merchant Ships and Shipping, by E. W. Blocksidge, 139
• Metallic-Arc Process, Electric Welding, by R. C. Stockton, 208
• Metallurgical Analysis by the Spectrograph, Research, Edited by D. M. Smith, 529
• Metallurgy, Aluminium and its Alloys, by N. F. Budgen, 481
• Metallurgy, Elementary, for Engineers, by
• G. F. C. Gordon, 335
• Metallurgy, Rise of, with Special Reference to Sheffield Discoveries, Inventions and Research, by Sir Robert Hadfield, 475
• Metallurgy, Steel Makers, by H. Brearley, 538 Mining Year Book, 1934. Compiled by W. E.
• Skinner, 498
• Motion and Time Study, Edited by A. H. Mogensen, 585
• Motive Power, Railway, Modern Trends in, by W. C. Dickerman, 335
• Motors, Induction, Modern Polyphase, by
• F. Punga and O. Roydt, 534
• Motor Industry, Buyers’ Guide, 119
• Motors in Line, Crankshafts with Minimum
• Mass Momentum, by Dr.-Ing. H. Schron, 538 Motor Road Transport, Commercial, by L. M.
• Meyrick-Jones, 254
• Motorships of the World and Motor-Shipping Register, Edited by A. C. Hardy, 21

• NAVAL Architecture, Tank Experiments, in Rome, 1932, 335
• Naval, Jane’s Fighting Ships, 82
• Newcomen Society Transactions, Vol. XI, 208 Nickel Cast Iron To-day, 538
• Nitrogen Conservation, Biochemistry of, Introduction to, by Dr. G. J. Fowler, 534

• OFANTO River, Regulation of Flow, by Dott.- Ing. R. Tramonte and G. Passarella, 284
• Office Administration for Manufacturers, by R. A. Mills, 394
• Orthographic and Isometric Drawing, by J. H. Pritchard, 20

• PHOTOGRAPHIC Almanac, British Journal, 357
• Physical Tables, Smithsonian, Prepared by
• F. E. Fowle, 529
• Physical Thought, Development of, by L. B. Loeb and D. A. Adams, 255
• Physics, The Crystalline State, Vol. I, A General Survey, by Dr. W. L. Bragg, 617
• Physics, Experimental. Vol. IV. Hydro- and Aerodynamics: Pipes, Open Channels and Viscosity, 577
• Physics, Rayleigh’s Principle and its Applications to Engineering, by Drs. G. Temple and W. G. Bickley, 589
• Physics, Textbook of, by E. Grimsehl. Edited by Dr. R. Tomaschek and Translated by L. A. Woodward, 505
• Physikalische Chemie der Kesselsteinbildung und ihrer Verhiitung, by R. Stumper, 475
• Pocket Books, Diaries, &c., 21, 82, 132, 412 Pocket Book and Diary, “ Practical Engineer,” 1934, 82
• Polyphase Induction Motors, Modem, by F. Punga and O. Roydt, 534
• Ports, Great Western Railway, 377
• Power, Electric: Part II, Descriptive Catalogue, Science Museum, by W. T. O’Dea, 475 Power Plant Engineering, Steam, by L. A.
• Harding, 394
• Power, Steam, Air and Gas, by W. H. Severns and H. E. Degler, 595
• ‘ ‘ Practical Engineer ” Mechanical Pocket Book and Diary, 1934, 82
• Premiers Essais de Cinematographic Ultra-
• Rapide, 32
• Press Guide, Willing’s, 21, 718
• Pumping Machinery, Part II. Descriptive Catalogue, by G. F. Westcott, 584

• RAILWAY Mechanics, Introduction to, by
• Prof. G. V. Lomonossoff, 475
• Railway Motive Power, Modern Trends in, by W. C. Dickerman, 335
• Railway Vehicles, Motion on a Curved Line, by C. F. Dendy Marshall, 505
• Ray-Controlled Mechanism, by Major R.
• Phillips, 32
• Rayleigh’s Principle and its Applications to Engineering, by Drs. G. Temple and W. G. Bickley, 589
• Rectifiers and Commutators, by H. Giroz, 255 Reid’s Handy Colliery Guide, 424
• Reference Books. See Annuals and Reference Books
• Regolazione Delle Acque Del Flume Ofanto, by Dott.-Ing. R. Tramonte and G. Passarella, 284
• Reinforced-Concrete Bridge Design, by C. S. Chettoe and H. C. Adams, 504
• Reinforced-Concrete Frames, Continuous, by
• H. Cross and N. D. Morgan, 577
• Research Association, British Non-Ferrous
• Metals, Metallurgical Analysis by the Spectrograph, Edited by D. M. Smith, 529 .Ripper’s Steam Engine, Theory and Practice, by Dr. W. J. Goudie, 451
• River Ofanto, Regulation of Flow, by Dott.-
• Ing. R. Tramonte and G. Passarella, 284 Road and Rail Traffic Act, 1933, and Commercial Road Users, by Col. F. G. Bristow, 632
• Road Transport, Motor, Commercial, by L. M. Meyrick-Jones, 254
• Road Users and the Road and Rail Traffic
• Act, 1933, by Col. F. G. Bristow, 632 Rubber and Automobiles, by O. Macbeth, 20
• Rubber in Chemical Engineering, by Dr. H. P. Stevens and M. B. Donald, 32

• SALVAGE, Deep-Sea, by A. G. Whyte and R. L. Hadfield, 577
• Schraubensicherungen, by Dr.-Ing. H. Schoeneich, 475
• Science Museum, Electric Power: Part II, Descriptive Catalogue, by W. T. O’Dea, 475
• Screw-Thread Locking Devices, by Dr.-Ing.
• H. Schoeneich, 475
• Services of Technical Man, Sale of, by E. Hurst, 529
• Sheffield and the Rise of Metallurgy, by Sir Robert Hadfield, 475
• Ships, British Corporation Register Book, 1934. 498
• Ships, Deep-Sea Salvage, by A. G. Whyte and R. L. Hadfield, 577
• Ships and Shipping, Merchant, by E. W. Blocksidge, 139
• Shipbuilders, Shipowners and Marine Engineers, Directory, 1934, 565
• Shipowners, Shipbuilders and Marine Engineers, Directory, 1934, 565
• Shippers, Merchants and Manufacturers of the World, Kelly’s Directory, 1934, 718
• Shipping, Motorships of the World and Motor- Shipping Register, Edited by A. C. Hardy, 21
• Shipping, Shipbuilding and Marine Engineering, Annual Review, 94
• Shop Practice, Engineering. Vol. I, by O. W.
• Boston, 590
• Singapore, Conditions in, 620
• Smithsonian Physical Tables, Prepared by
• F. E. Fowler, 529
• Smoke and the Atmosphere, by Dr. J. R. Ashworth, 632
• Societies, Scientific and Learned, Year Book of, 1933, 21
• South American Handbook,, 1934, 565 Spectrographic Analysis of Metals, Research,
• Edited by D. M. Smith, 529
• Stabilisation, Gyroscopic,' of Land Vehicles, by Dr. J. F. S. Ross, 394
• Statik der Bauwerke, by K. Zillich. Part II. Festigkeitslehre, 32
• Steam, Air and Gas Power, by W. H. Severns and H. E. Degler, 595
• Steam Engine, Ripper’s, Theory and Practice by Dr. W. J. Goudie, 451
• Steam Power Plant Engineering, by L. A. Harding, 394
• Steamboat Pioneer, John Fitch, by P. Augustin- Normand, 584
• Steamships, Early British, Records of, by Capt. N. W. Kennedy, 595
• Steel Makers, by H. Brearley, 538
• Steel Mill Buildings, Design of, and the Calculation of Stresses in Framed Structures, by Dr. M. S. Ketchum, 140
• Steel, Refined, Technology of, by Eng.-Chem. A. Kropf, 632
• Steel Structures, Competitive Design of, by P. Russell and G. Dowell, 480
• Steelwork in Buildings under L.C.C. Code of Practice, by D. H. Lee, 538
• Steelwork, Modern, 580
• Steelwork, Structural, Edited by G. Schaper, 140
• Strength of Materials, by J. P. Kottcamp and
• A. C. Harper, 20
• Stresses, Buckling, in Lattice Members, by Dr.-Ing. G. Ruhl, 211
• Stresses in Framed Structures, Calculation of, by Dr. M. S. Ketchum, 140
• Structural Engineering: Education, Training and Employment, 633
• Structural Steelwork, L.C.C. Code of Practice, by D. H. Lee, 538
• Structural Steelwork, Principles, Edited by G. Schaper, 140
• .Structures, Steel, Competitive Design of, by P. Russell and G. Dowell, 480
• Surfaces, Catalytic Action of, by J. G. Nyrop, 577

• TABLES of Differences and for Hyperbolic, Bessel, Elliptical and other Functions, by Prof. K. Hayashi, 584
• Tables of Electricity Undertakings, 47th
• Edition, 633
• Tables, Physical, Smithsonian, Prepared by F. E. Fowle, 529
• Tafeln fur die Differenzenrechnung sowie fur die Hyperbel, Besselschen, Elliptischen und anderen Funktionen, by Prof. K. Hayashi, 584
• Tank Experiments, National, on Ship Models, Rome, 1932, 335
• Technical Man Sells his Services, by E. Hurst, 529
• Technical Measurements for Workshop Processes, etc., by Dr.-Ing. A. Gramberg, 394
• Technical Thermodynamics, by Prof. Dipl.-Ing. W. Schiile, 481
• Technische Messungen bei Maschinenunter- suchungen und zur Betriebskontrolle, by Dr.-Ing. A. Gramberg, 394
• Technischen Werkstoffe, Ihre Eigenschaften, Fehler und Priifung, by Dr. O. Schwarz, 139
• Technologie des Edelstahles, by Eng.-Chem. A. Kropf, 632
• Testing High - Speed Internal - Combustion, Engines, by A. W. Judge, 617
• Thdorie Gdndrale du Coup de Bdlier, by Dr. C. Jaeger, 578
• Thermodynamics Applied to Heat Engines, by E. H. Lewitt, 285
• Thermodynamics, Technical, by Prof. Dipl.- Ing. W. Schiile, 481
• Thought, Physical, Development of, by L. B. Loeb and D. A. Adams, 255
• Timber, Aircraft, Standard Nomenclature, 474 Time and Motion Study, Edited by A. H. Mogensen, 585
• Torsional Vibrations of Aero-Engine Crankshafts, Damping of, by Prof. J. L. Mansa, 529
• Traits de Chimie Organique. Vols. I and II, by A. E. Tchitchibabine, 139
• Transformation of Electrical Energy. II. Commutators and Rectifiers, by H. Groz, 255 Transmission and Distribution, Electrical, by E. T. A. Rapson, 367
• Transport, Air, Manual, by Staff of “ Commercial Motor,” .450
• Transport, Motor, Road, Commercial, by L. M. Meyrick-Jones, 254
• Trevithick, Richard, the Engineer and the Man, by H. W. Dickinson and A. Titley, 211
• Truss, the Wichert, by Dr. D. B. Steinman, 211
• UN Prdcurseur des Bateaux a Vapeur John Fitch, by P. Augustin-Normand, 584

• VEHICLES, Land, Gyroscopic Stabilisation of, by Dr. J. F. S. Ross, 394
• Vehicles, Railway, Motion on a Curved Line, by C. F. Dendy Marshall, 505
• Ventilating Air Conditioning and Heating, by L. A. Harding and A. C. Willand, 208
• Verchromung, by Prof. Dr. E. H. Q. Bauer, Prof. H. Arndt and Dr.-Ing. W. Krause, 633
• Verhalten keramisch er Werkstoffe bei Zugdruck- Dauerbeanspruchung, by Dr.-Ing. F. Heu- mann, 335
• Vibration Frequency, Rayleigh’s Principle, and its Applications to Engineering, by Drs. G. Temple and W. G. Bickley, 589
• Vibrations, Torsional, of Aero-Engine Crankshafts, Damping of, by Prof. J. L. Mansa, 529
• Vorlesungen fiber Techische Mechanik. IV. Dynamik, by Dr.-Ing. A. Foppl, 367

• WAGES Calculator, Walcelin’s 47-Hours, 335
• Wakelin’s 47-Hours Wages Calculator, 335
• Warsaw Aeronautical Research Institute, Bulletin No. 10, 475
• Warships, Jane’s Fighting Ships, 82
• Water Engineer’s Handbook and Directory, 1934, 565
• Water Hammer, General Theory, by Dr. C. Jaeger, 578
• Welding, Electric, Metallic-Arc Process, by R. C. Stockton, 208
• Who’s Who, 1934, 412
• Wichert Truss, by Dr. D. B. Steinman, 211
• Willing’s Press Guide, 21, 718
• Winterarbeiten im Beton-und Eisenbetonbau, by Prof. Dr.-Ing. A. Kleinlogel, 284
• Works Management Education, with Special Reference to the Case System, by T. H. Burnham, 451

• YEARBOOK, “Mechanical World,” 1934,300
• Year Book, Mining, Compiled by W. E. Skinner, 498
• Year Boole of Scientific and Learned Societies, 1933, 21
• Year Book, South and East African, Edited by A. S. and G. G. Brown, 424
• Year Books. See also Annuals and. Reference Books

See Also

Loading...