Grace's Guide is the leading source of historical information on industry and manufacturing in Britain. This web publication contains 148,143 pages of information and 233,681 images on early companies, their products and the people who designed and built them.
of Sheepcote Street, Birmingham.
1886 Listed as the Quadrant Tricycle Co 
1895 October 24th. Became a limited company. The company was registered to take over a private business carried on under the same title. Directors were: William Priest, Managing Director; Walter John Lloyd; Henry G. Priest; and William A. Priest  
1897 Exhibited a chainless cycle at the National Cycle Show
1900 The firm moved into the world of motorcycles by fitting a Minerva engine to the down-tube of a heavy-duty bicycle. They then moved on to a forecar.
1901 November. Details of the motor tricycle.
1903 The company had its own design of engine mounted in a loop frame. This design had a single lever to control the throttle, ignition switch, spark advance and valve lifter. That year Tom Silver set a new Land's End to John O'Groats record on a 3hp model, which boosted sales greatly.
1903 The Quadrant was first brought out at the end of the year, as a single speed machine, and was one of several makes of forecar that enjoyed a run of popularity at that time.
For 1904, a two-speed model was available, gear selection being made by the engagement of friction clutches to V-belt pulleys situated in the region of the bottom bracket. A curious arrangement of two air-cooled engines mounted side-by-side was employed, these being connected by a leather faced clutch when load conditions required the use of both. Final drive was by chain.
From 1903 onward Quadrant produced their own engines in a wide range of capacities and types.
1904 A forecar model was added. This had twin 2.5hp engines. They were mounted side-by-side with a clutch in between, so one or both could be used.
1905 October. Details of the Lloyd change-speed gear. Lloyd is Chief Engineer of Quadrant.
1949 J. R. Mead, chartered accountant of Coventry, was appointed liquidator of the company; on the same day he was also appointed liquidator of:
Extract from Bartlett. 
No. 47. “Quadrant" bicycle, fitted with Lloyd's "Cross-roller" gear, patent No. 6435/1897. Weight of complete machine 35 lbs. Presented by E. Figg. The rear portion of a frame is shown, separately, to demonstrate the mechanism of the gear; this was presented by A. R. Wayte, of Dublin.
This gear was a development of — but a great improvement upon — the bevel system of driving; when two "teeth," one driving and one driven, engaged each other, each was free to revolve on a fixed stud: this minimised the friction which is inseparable from any rigid mechanical method of conveying rotary drive round a right-angled corner. The hollow shaft, enclosing the usual chain-stay, revolved on ball-bearings. A letter from Walter John Lloyd, inventor of the gear, accompanies the exhibit. Mr. Lloyd (who is still alive) was an extremely clever engineer, and was responsible for the many ingenious innovations which were embodied in “Quadrant " cycles. Notable among these were the special method of mounting the front wheel of a tricycle, which helped to make the “Quadrant" of 1886-1890 such a popular
Mr. Lloyd also devised a very efficient spring-frame, while his back-pedaling band-brake* (fitted to exhibit No. 47) will repay careful examination. Note also the extension from the fork crown, strengthening each blade.*
Harry Chinn, of Birmingham — brother of the more famous Fred. Chinn — made several records on the Crystal Palace track, using a “Quadrant" racing bicycle with Lloyd's cross-roller gear. He ran third in the 50-miles National Championship, and covered 29 miles 465 yards in one hour (15th September, 1900).
National Cycle Collection exhibits:-
National Motorcycle Museum exhibits:-