Thomas Wainwright and Sons: Difference between revisions
From Graces Guide
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
Late 1940s. Repaired water turbines at Belper East Mill.<ref>Fred Copeland in Model Engineer 1991</ref> | Late 1940s. Repaired water turbines at Belper East Mill.<ref>Fred Copeland in Model Engineer 1991</ref> | ||
1958. 80 HP horizontal twin cylinder cross-compound engine, 12" and 21" x 2 ft stroke, with a rope-drive pulley. Photographed by George Watkins at the Stalybridge works of [[Robert Broadbent and Son]] in 1958.<ref>‘Stationary Steam Engines of Great Britain, Volume 4: Wales, Cheshire & Shropshire‘, by George Watkins, Landmark Publishing Ltd</ref> This engine was originally [[Woolstenhulme and Rye|Woolstenhulme & Rye]] works no. 272 of 1878, 16"+30" x 5' slide valve twin tandem compound, 900hp at Broadbent & Co, Oakfield Mill, Droylsden, Lancs. It was rebuilt by Wainwright during wakes fortnight 1953 with Corliss HP cylinders.<ref> | 1958. 80 HP horizontal twin cylinder cross-compound engine, 12" and 21" x 2 ft stroke, with a rope-drive pulley. Photographed by George Watkins at the Stalybridge works of [[Robert Broadbent and Son]] in 1958.<ref>‘Stationary Steam Engines of Great Britain, Volume 4: Wales, Cheshire & Shropshire‘, by George Watkins, Landmark Publishing Ltd</ref> This engine was originally [[Woolstenhulme and Rye|Woolstenhulme & Rye]] works no. 272 of 1878, 16"+30" x 5' slide valve twin tandem compound, 900hp at Broadbent & Co, Oakfield Mill, Droylsden, Lancs. It was rebuilt by Wainwright during wakes fortnight 1953 with Corliss HP cylinders.<ref>Watkins, George (1970) The Textile Mill Engine vol. 1, plates 70-72.</ref> | ||
==See Also== | ==See Also== | ||
Revision as of 08:55, 23 February 2017
Thomas Wainwright and Sons of Commercial Iron Works, Stalybridge were Engineers, Millwrights, Brass and Iron Founders and of Steam Engines.
Maker of stationary engines. [1]
Late 1940s. Repaired water turbines at Belper East Mill.[2]
1958. 80 HP horizontal twin cylinder cross-compound engine, 12" and 21" x 2 ft stroke, with a rope-drive pulley. Photographed by George Watkins at the Stalybridge works of Robert Broadbent and Son in 1958.[3] This engine was originally Woolstenhulme & Rye works no. 272 of 1878, 16"+30" x 5' slide valve twin tandem compound, 900hp at Broadbent & Co, Oakfield Mill, Droylsden, Lancs. It was rebuilt by Wainwright during wakes fortnight 1953 with Corliss HP cylinders.[4]
See Also
Loading...
Sources of Information
- ↑ Stationary Steam Engines of Great Britain by George Watkins. Vol 10
- ↑ Fred Copeland in Model Engineer 1991
- ↑ ‘Stationary Steam Engines of Great Britain, Volume 4: Wales, Cheshire & Shropshire‘, by George Watkins, Landmark Publishing Ltd
- ↑ Watkins, George (1970) The Textile Mill Engine vol. 1, plates 70-72.