Grace's Guide To British Industrial History

Registered UK Charity (No. 115342)

Grace's Guide is the leading source of historical information on industry and manufacturing in Britain. This web publication contains 162,253 pages of information and 244,496 images on early companies, their products and the people who designed and built them.

Grace's Guide is the leading source of historical information on industry and manufacturing in Britain. This web publication contains 147,919 pages of information and 233,587 images on early companies, their products and the people who designed and built them.

Ferndale Colliery

From Graces Guide
Revision as of 17:27, 4 January 2020 by JohnD (talk | contribs)
Lanhmeyer flywheel alternators and Sulzer steam engines at Ferndale Collieries. Photo from 'The South Wales Coal Annual' for 1908, via Archive.org
This photograph, found between the pages of a book, is unidentified, but clearly shows one of the Lahmeyer alternators at Ferndale Colliery . Ironically, the book was about steam turbines, which would spell the end of large reciprocating steam engines and their flywheel alternators

109/111 New Oxford Street, London

Lahmeyer and Co supplied electrical equipment to David Davis and Sons for their Ferndale Collieries. This included three Lahmeyer flywheel generators working at 2200 volts, 25 Hz, 3-phase driven by Sulzer Bros cross-compound 2500 HP engines. See photographs. Lahmeyer also supplied, for the No. 9 Pit, the first electric winding machinery to be operated in the South Wales Coalfield. It worked on the Ilgner System, with a 16-feet parallel drum coupled to two direct current motors mounted on either side, each giving a maximum output of 1,250 HP. The DC current for driving the winder motors came from a large Ilgner Motor Generator, consisting of a three-phase 2,200 volt motor (750 HP) driven direct from the power station supply. A DC generator supplied the winding motors, and there was a large cast steel flywheel, weighing approximately 30 tons, coupled on the same shaft, to supply the necessary power to the DC Generator in excess of that supplied by the three-phase motor in order to generate sufficient power for the winder-motors during the early part of the wind, when the load was very heavy. The flywheel had a maximum speed of 500 rpm, and had the effect of equalizing the load taken from the power station. The flywheel was 13 feet diameter, and 3 feet wide on the rim.[1]

1830s The Ferndale Colliery was sunk in the early thirties by David Davies, who started as a draper, who worked a small anthracite level under the Marquess of Bute. See David Davies and Sons

See Also

Loading...

Sources of Information

  1. [1] The South Wales Coal Annual for 1908, via Archive.org