Grace's Guide To British Industrial History

Registered UK Charity (No. 115342)

Grace's Guide is the leading source of historical information on industry and manufacturing in Britain. This web publication contains 162,257 pages of information and 244,498 images on early companies, their products and the people who designed and built them.

Grace's Guide is the leading source of historical information on industry and manufacturing in Britain. This web publication contains 147,919 pages of information and 233,587 images on early companies, their products and the people who designed and built them.

Difference between revisions of "George Saxon"

From Graces Guide
(14 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[Image:Saxon01.jpg|thumb|  Former works of George Saxon, at the junction of South St and Tram St, Openshaw, as seen in November 2008]]
[[Image:Saxon01.jpg|thumb|  Former works of George Saxon, at the junction of South St and Tram St, Openshaw, as seen in November 2008]]
[[image:George Saxon 1910TS.jpg|thumb| 1910. ]]
[[image:Im1911Royal-Saxon.jpg|thumb| 1911. ]]
[[Image:Magnet-1.jpg|thumb| 2200hp Twin Tandem Compound Engine at Magnet Mill, Oldham.  George Saxon, 1903 ]]
[[Image:Magnet-1.jpg|thumb| 2200hp Twin Tandem Compound Engine at Magnet Mill, Oldham.  George Saxon, 1903 ]]
[[Image:Magnet-2.jpg|thumb| 2200hp Twin Tandem Compound Engine at Magnet Mill, Oldham ]]
[[Image:Magnet-2.jpg|thumb| 2200hp Twin Tandem Compound Engine at Magnet Mill, Oldham ]]
Line 7: Line 9:
[[Image:Saxon02.jpg|thumb|  George Saxon barring engine at Manchester Museum of Science & Industry ]]
[[Image:Saxon02.jpg|thumb|  George Saxon barring engine at Manchester Museum of Science & Industry ]]
[[Image:George_Saxon01.jpg|thumb| George Saxon four cylinder triple expansion engine for cotton spinning mill overseas ]]
[[Image:George_Saxon01.jpg|thumb| George Saxon four cylinder triple expansion engine for cotton spinning mill overseas ]]
[[Image:Geo Saxon01.jpg|thumb| 1909? Two-cylinder barring engine from a 1300 IHP engine at Hawthorn Mill, Chadderton, near Oldham. The gears would be engaged with the flywheel in order to ’bar’ the engine over slowly. On display at the [[Bolton Steam Museum]] ([[Northern Mill Engine Society]]) in Bolton ]]
[[Image:Im20100530BSM-09c.jpg|thumb| Barring engine. Exhibit at [[Bolton Steam Museum]]. ]]
[[Image:Im20100530BSM-09c.jpg|thumb| Barring engine. Exhibit at [[Bolton Steam Museum]]. ]]
[[Image:Im20100530BSM-GeoSaxon.jpg|thumb| Exhibit at [[Bolton Steam Museum]]. ]]
[[Image:Im20100530BSM-GeoSaxon.jpg|thumb| Exhibit at [[Bolton Steam Museum]]. ]]
[[Image:Geo Saxon01.jpg|thumb| 1909? Two-cylinder barring engine from a 1300 IHP engine at Hawthorn Mill, Chadderton, near Oldham. The gears would be engaged with the flywheel in order to ’bar’ the engine over slowly. On display at the [[Northern Mill Engine Society]] museum in Bolton ]]


'''George Saxon''' of Openshaw Engineering Works, Manchester were makers of stationary steam engines<ref>'Stationary Steam Engines of Great Britain: Vol 10' by George Watkins.</ref>
[[Image:Im1911EnV111-p137a.jpg|thumb| 1911. ]]
[[Image:Im1911EnV111-p137b.jpg|thumb| 1911. ]]
[[Image:Im191203EC-Saxon.jpg|thumb| March 1912. ]]


1864 Company established to build mill engines. Exhibit at Manchester's Museum of Science and Industry
'''George Saxon''' of Openshaw Engineering Works, South Street, Openshaw, Manchester were makers of stationary steam engines<ref>'Stationary Steam Engines of Great Britain: Vol 10' by George Watkins.</ref>
 
1864 Company established by [[George Saxon (1821-1875)]] to build mill engines. Exhibit at Manchester's Museum of Science and Industry


1878 4-cylinder Triple Expansion engine for [[Hawthorn Mill, Chadderton]]  (1250/1300hp). Its small barring engine has survived, and is displayed at the [[Northern Mill Engine Society]] museum in Bolton. See photo.  
1878 4-cylinder Triple Expansion engine for [[Hawthorn Mill, Chadderton]]  (1250/1300hp). Its small barring engine has survived, and is displayed at the [[Northern Mill Engine Society]] museum in Bolton. See photo.  


1886 Engine for [[Stamford Commercial Weaving Co]], Carrs Mill, Ashton-under-Lyme
1886 Engine for [[Stamford Commercial Weaving Co]], Carrs Mill, Ashton-under-Lyne


1903 Engine for the [[Tudor Mill, Ashton-under-Lyne]]
1903 Engine for the [[Tudor Mill, Ashton-under-Lyne]]
Line 25: Line 31:
1913 Steam engine at Pear New Mill, Bredbury. This was a very large double ‘Manhattan’ engine, having horizontal high pressure cylinders and vertical low pressure cylinders, driving a pulley grooved for 73 ropes. It was designed to produce 4000 HP, but in the event only half of the mill was completed, so only half of the engine was used.  Photographed by George Watkins in 1952.<ref>‘Stationary Steam Engines of Great Britain, Volume 4: Wales, Cheshire & Shropshire‘, by George Watkins, Landmark Publishing Ltd</ref>
1913 Steam engine at Pear New Mill, Bredbury. This was a very large double ‘Manhattan’ engine, having horizontal high pressure cylinders and vertical low pressure cylinders, driving a pulley grooved for 73 ropes. It was designed to produce 4000 HP, but in the event only half of the mill was completed, so only half of the engine was used.  Photographed by George Watkins in 1952.<ref>‘Stationary Steam Engines of Great Britain, Volume 4: Wales, Cheshire & Shropshire‘, by George Watkins, Landmark Publishing Ltd</ref>


1938 Death of James Saxon, one of George Saxon's sons, reported <ref>IMechE Proceedings Vol 138 </ref>. He was born in 1858 and served his apprenticeship at Saxon's works 1872 - 1879. He became manager on the death of his father in 1879, and was made a partner in the firm. He retired from active business in 1918, but continued to live at Higher Openshaw.
1943 Company ceased trading.<ref>https://www.thegazette.co.uk/London/issue/35968/page/1594/data.pdf</ref>


Barring engine for mill engine. Exhibit at [[Manchester's Museum of Science and Industry]]
Barring engine for mill engine. Exhibit at [[Manchester's Museum of Science and Industry]]


See [[George Saxon: List of Engines]]


== See Also ==
== See Also ==
Line 37: Line 44:




 
{{DEFAULTSORT: Saxon, G}}
{{DEFAULTSORT: Saxon}}
[[Category: Town - Openshaw]]
[[Category: Town - Manchester]]
[[Category: Stationary Steam Engines]]
[[Category: Stationary Steam Engines]]

Revision as of 21:38, 5 March 2020

Former works of George Saxon, at the junction of South St and Tram St, Openshaw, as seen in November 2008
1910.
1911.
2200hp Twin Tandem Compound Engine at Magnet Mill, Oldham. George Saxon, 1903
2200hp Twin Tandem Compound Engine at Magnet Mill, Oldham
HP valve gear from Magnet Mill, formerly on display at old Manchester Museum of Science and Industry (1974)
1250hp 4-cylinder triple at Hawthorn Mill, Chadderton
Hawthorn Mill, Chadderton, showing barring engine (now preserved) in situ
George Saxon barring engine at Manchester Museum of Science & Industry
George Saxon four cylinder triple expansion engine for cotton spinning mill overseas
1909? Two-cylinder barring engine from a 1300 IHP engine at Hawthorn Mill, Chadderton, near Oldham. The gears would be engaged with the flywheel in order to ’bar’ the engine over slowly. On display at the Bolton Steam Museum (Northern Mill Engine Society) in Bolton
Barring engine. Exhibit at Bolton Steam Museum.
Exhibit at Bolton Steam Museum.
1911.
1911.
March 1912.

George Saxon of Openshaw Engineering Works, South Street, Openshaw, Manchester were makers of stationary steam engines[1]

1864 Company established by George Saxon (1821-1875) to build mill engines. Exhibit at Manchester's Museum of Science and Industry

1878 4-cylinder Triple Expansion engine for Hawthorn Mill, Chadderton (1250/1300hp). Its small barring engine has survived, and is displayed at the Northern Mill Engine Society museum in Bolton. See photo.

1886 Engine for Stamford Commercial Weaving Co, Carrs Mill, Ashton-under-Lyne

1903 Engine for the Tudor Mill, Ashton-under-Lyne

1903 2200hp Twin Tandem Compound Engine for Magnet Mill, Oldham. A set of valve gear from the RH High Pressure cylinder of this engine is believed to survive at Manchester Museum of Science and Industry, but is not on display.

1913 Steam engine at Pear New Mill, Bredbury. This was a very large double ‘Manhattan’ engine, having horizontal high pressure cylinders and vertical low pressure cylinders, driving a pulley grooved for 73 ropes. It was designed to produce 4000 HP, but in the event only half of the mill was completed, so only half of the engine was used. Photographed by George Watkins in 1952.[2]

1943 Company ceased trading.[3]

Barring engine for mill engine. Exhibit at Manchester's Museum of Science and Industry

See George Saxon: List of Engines

See Also

Loading...

Sources of Information

  1. ↑ 'Stationary Steam Engines of Great Britain: Vol 10' by George Watkins.
  2. ↑ ‘Stationary Steam Engines of Great Britain, Volume 4: Wales, Cheshire & Shropshire‘, by George Watkins, Landmark Publishing Ltd
  3. ↑ https://www.thegazette.co.uk/London/issue/35968/page/1594/data.pdf
Retrieved from "https://gracesguide.co.uk/index.php?title=George_Saxon&oldid=1152820"
Privacy policy Disclaimers About Grace’s Guide Contact Grace’s Guide

Grace's Guide web site design is Copyright © 2021 by Grace's Guide Ltd. The text of this web site is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. By using this site, you agree to the Terms of Use and Privacy Policy. Maintained by Sapere Software