Grace's Guide is the leading source of historical information on industry and manufacturing in Britain. This web publication contains 148,394 pages of information and 233,863 images on early companies, their products and the people who designed and built them.
Maidenhead Railway Bridge (aka Maidenhead Viaduct) is a railway bridge built to carry the main line of the Great Western Railway over the River Thames between Maidenhead, Berkshire and Taplow, Buckinghamshire. It crosses the Thames on the reach between Bray Lock and Boulter's Lock
The bridge was designed by Isambard Kingdom Brunel, and it was completed in 1838, but not brought into use until 1 July 1839. The resident engineer was John Wallis Hammond, and the contractor was William Chadwick
The railway is carried across the river on two brick arches, which at the time of building were the widest and flattest masonry arches in the world. Each span is 128 feet, with a rise of only 24 (28?) feet. The flatness of the arches was necessary to avoid putting a "hump" in the bridge, which would have gone against Brunel's obsession with flat, gentle gradients (1 in 1,320 on this stretch).
The Thames towpath passes under the right-hand arch (facing upstream), which is also known as the Sounding Arch, because of its spectacular echo.
The timber centring for the eastern arch had been eased prematurely by William Chadwick, and the three lowest rings of brickwork began to settle, separating from the body of the arch, due to inadequate setting of the mortar. Chadwick accepted responsibility and took corrective action.
It has been claimed that the board of the Great Western Railway did not believe that the arches would stay up under the weight of the trains and ordered Brunel to leave the wooden centring (formwork) used to construct the arches in place. However, Brunel simply lowered the formwork slightly so that it had no structural effect, but appeared to be in place. Later, when the formwork was washed away in floods, but the bridge remained, the strength of the arches was accepted.
As built, Maidenhead Railway Bridge carried two lines of Brunel's broad gauge track. Prior to the final conversion to the standard rail gauge, during 1890-1892 the bridge was widened on each side in order to carry four standard gauge tracks. This work was supervised by Sir John Fowler, the width overall being increased from 30ft to 57ft 3in. The outward appearance remained almost unaltered.
This drawing shows the arrangement one of the abutments. The abutments incorporate four arches with semi-circular tops. The piers of the two arches nearest to the river are joined by brickwork underground. As can be seen in the drawing, this brickwork has a 'sawtooth' form to resist the thrust of the arches.