Vaucanson's Drilling Machine: Difference between revisions
From Graces Guide
Created page with "This is an innovative and beautifully-made machine, designed in the 18th century by Jacques de Vaucanson, and on display at the Musee des Arts et Metiers in Paris. It..." |
No edit summary |
||
| Line 1: | Line 1: | ||
[[Image:JD 2019 CNAM Vaucanson22.jpg|thumb|]] | |||
[[Image:JD 2019 CNAM Vaucanson17.jpg|thumb|]] | |||
[[Image:JD 2019 CNAM Vaucanson19.jpg|thumb|]] | |||
[[Image:JD 2019 CNAM Vaucanson18.jpg|thumb|]] | |||
[[Image:JD 2019 CNAM Vaucanson16.jpg|thumb|]] | |||
[[Image:JD 2019 CNAM Vaucanson21.jpg|thumb|]] | |||
[[Image:JD 2019 CNAM Vaucanson23.jpg|thumb|]] | |||
This is an innovative and beautifully-made machine, designed in the 18th century by [[Jacques de Vaucanson]], and on display at the [[Musee des Arts et Metiers]] in Paris. | This is an innovative and beautifully-made machine, designed in the 18th century by [[Jacques de Vaucanson]], and on display at the [[Musee des Arts et Metiers]] in Paris. | ||
Revision as of 08:21, 1 April 2019
This is an innovative and beautifully-made machine, designed in the 18th century by Jacques de Vaucanson, and on display at the Musee des Arts et Metiers in Paris.
Its intended application is obscure. It was designed to drill small holes in a horizontal plane. The drilling head was guided horizontally and vertically and positioned by leadscrews. These were of fine pitch and were equipped with micrometer dials to allow precise positioning. The machine could therefore be used for what is now known as 'co-ordinate drilling'. The spindle was belt-driven and was fed into the work by turning a screw.
Felix Rosat was responsible for the production of the drilling machine and of Vaucanson's Lathe.[1]
See Also
Loading...
Sources of Information
- ↑ 'Scientific Instruments of the 17th & 18th Centuries and their Makers' by Maurice Daumas, translated by Dr Mary Holbrook, Portman Books, 1972, p.308