Benjamin Goodfellow: Difference between revisions
From Graces Guide
PeterEllis (talk | contribs) No edit summary |
PeterEllis (talk | contribs) No edit summary |
||
| Line 6: | Line 6: | ||
Stationary engines. (B. Goodfellow and Co). | Stationary engines. (B. Goodfellow and Co). | ||
Between 1901 and 1903 Benjamin Goodfellow carried out major work on the four [[James Watt | Between 1901 and 1903 Benjamin Goodfellow carried out major work on the four [[James Watt and Co]] Beam Engines at [[Crossness Pumping Station]]. Originally 125hp single cylinder beam engines, these engines were tripled by replacing the original 48" diameter cylinder with a new 44" which became the Low Pressure, together with a new 33" IP cylinder alongside it (as in a Woolf compound), with the new 19" High pressure cylinder in tandem with it below floor level. All cylinders were fitted with Corliss valves. | ||
== See Also == | == See Also == | ||
Revision as of 17:19, 19 January 2012
of Hyde, near Manchester
Stationary engines. (B. Goodfellow and Co).
Between 1901 and 1903 Benjamin Goodfellow carried out major work on the four James Watt and Co Beam Engines at Crossness Pumping Station. Originally 125hp single cylinder beam engines, these engines were tripled by replacing the original 48" diameter cylinder with a new 44" which became the Low Pressure, together with a new 33" IP cylinder alongside it (as in a Woolf compound), with the new 19" High pressure cylinder in tandem with it below floor level. All cylinders were fitted with Corliss valves.
See Also
Loading...
Sources of Information
- Stationary Steam Engines of Great Britain by George Watkins. Vol 10