J. Campbell Evans: Difference between revisions
From Graces Guide
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
'''J. Campbell Evans''' of Morden Iron Works at Greenwich | '''J. Campbell Evans''' of Morden Iron Works at Greenwich | ||
1859 Produced small steam cranes, described in a Paper by J C Evans<ref>[http://www02.us.archive.org/stream/proceedings185900inst#page/238/mode/2up]IMechE Proceedings 1859</ref>. The cranes had a single oscillating cylinder, and drive to the hoist drum was via grooved friction wheels. A hand lever was pushed down to engage the pair of friction wheels, and raised to disengage the wheels and then press the driven wheel against a brake block. | |||
1863 Tendered for three locomotives for the [[Ffestiniog Railway]] but probably not successful <ref>British Steam Locomotive Builders by James W. Lowe. Published in 1975. ISBN 0-905100-816</ref> | 1863 Tendered for three locomotives for the [[Ffestiniog Railway]] but probably not successful <ref>British Steam Locomotive Builders by James W. Lowe. Published in 1975. ISBN 0-905100-816</ref> | ||
Revision as of 21:13, 12 January 2013
J. Campbell Evans of Morden Iron Works at Greenwich
1859 Produced small steam cranes, described in a Paper by J C Evans[1]. The cranes had a single oscillating cylinder, and drive to the hoist drum was via grooved friction wheels. A hand lever was pushed down to engage the pair of friction wheels, and raised to disengage the wheels and then press the driven wheel against a brake block.
1863 Tendered for three locomotives for the Ffestiniog Railway but probably not successful [2]
See Also
Loading...