Engineering 1942 Jan-Jun: Index: Patent Record

Engineering 1942 Jan-Jun: Index: Patent Record

Engineering 1942 Jan-Jun: Index: Patent Record

Note: This is a sub-section of Engineering 1942 Jan-Jun: Index

• View 1942 Jan-Jun Volume

PATENT RECORD

SUBJECT MATTER.

Aeronautics :

• Airscrew Blade. Rotol Airscrews, Ltd., and W. Brierley, 340
• Bomb Carrier for Aircraft. A. V. Roe and Co., Ltd., and G. Beardshall, 440
• De-Icing Apparatus. Constant Speed Air Screws, Ltd., and F. G. Marshall, 40
• De-Icing System. General Aircraft, Ltd., and E. C. G. England, 400
• Engines, Aircraft, Direct Cooling of. Constant Speed Airscrews, Ltd., R. McGlasson and F. G. Marshall, 520
• Landing Gear, Aircraft. Dowty Equipment, Ltd., and P. W. Burke, 200
• Supercharger, Aero-Engine, Control. Aero Engines, Ltd., and G. F. Halliday, 180
• Target-Towing Device. A. G. Frazer-Nash and C. B. Lowe, 380
• Wing Tip Floats, Retractable. Blackburn Aircraft, Ltd., and J. D. Rennie, 240

Furnace Apparatus ;

• Furnace,. Continuous. G.W.B. Electric Furnaces, Ltd., and J. McDonald, 420
• Furnace, Continuous Heating. Wellman Smith Owen Engineering Corporation, Ltd., and G. A. Scott, 160
• Furnace, Stepped-Grate. John Thompson Water Tube Boilers, Ltd., and A. W. E. Walker, 260
• Gas Producer. C.U.R.A. Patents, Ltd., and J. S. Hales, 20
• Melting Pot, Crucible. J. Stone and Co., Ltd., and E. C. Lewis, 280
• Nitriding Furnace. G.W.B. Electric Furnaces, Ltd., and J. McDonald, 200
• Producer Gases, Cleaning. Whessoe Foundry and Engineering Co., Ltd., and A. E. Taylor, 120

Guns and Explosives :

• Fuse-Setting Apparatus for Shells. Molins Machine Co., Ltd., and V. P. Harvey, 160
• Machine-Gun Cartridge Belt Chute. Hadley Co., Ltd., and G. D. Rosser, 100

Hydraulic Apparatus :

• Coupling, Pipe, Fluid-Tight. Gullick, Ltd., and T. Seaman, 240
• Gun Turret, Hydraulic, Bristol Aeroplane, Ltd., and R. Ponting, 280
• Piston Packing. Stanhay, Ltd., and C. E.
• Goldup, 480
• Press, Hydraulic. Turner Tanning Machinery Co., Ltd., and G. A. Schettler, 100
• Pressure-Control System. R. Bennett and A. Ewing, 80
• Reducing Valve, Double-Beat,. Manlove
• Alliott and Co., Ltd., and J. M. Hodges, 340 Remote-Control System, Hydraulic. Automotive Products Co., Ltd., Chadburn’s (Ship) Telegraph Co., Ltd., F. S. Eves and A. C. Bamford, 440
• Straightening Machine, Hydraulic. Finlay
• Conveyor Co., Ltd., and R. P. Finlay, 320 Torsionmeter. Cockburns, Ltd., J. Rodger and T. Grant, 140
• Valve. Barr, Thomson and Co., Ltd., and J. L. Reid, 460

Internal-Combustion Engines :

• Compression-Ignition Engine. J. Fowler and Co. (Leeds), Ltd., and A. F. Sanders, 60 Starter, Cartridge. Rotax, Ltd., and J. D. S.
• de Gu6rin, 440
• Starter, Internal - Combustion Engine.
• Plessey Co., Ltd., and H. Da Costa, 300 Torsional Vibration Dampers. Ruston and
• Hornsby, Ltd., and C. H. Bradbury, 400
• Lifting and Hauling Appliances :
• Central Buffer and Draw Gear. G. Spencer Moulton and Co., Ltd., and R. K. Glas- codine, 380
• Grab. United Steel Companies, Ltd., and E. R. Coy, 520
• Rope Tensions, Measuring. British Ropes, Ltd., and H. Hitchen, 320
• Truck, Elevating Platform. R. A. Lister and Co., Ltd., and P. B. Ashworth, 80

Machine Tools and Machine Shop Equipment :

• Diamond Tool. E. L. and J. I. Meeson, 500
• Fly-Press Safety Mechanism. Taylor and Challen, Ltd., and H. D. Challen, 260
• Lubricator, Ball-Bearing. Churchill Machine Tool Co., Ltd., and H. H. Ashbridge, 140
• Planing-Machine Feed Mechanism, William Denny and Brothers, Ltd., and B. Barback, 360
• Press-Tool Bolster. British Tyre and Rubber Co., Ltd., and W. N. Evans, 120
• Tool Holder for Machine Tools. P. P. Thornton, F. M. Shaw, and Pultra, Ltd., 520

Metallurgy :

• Alloys, Light, Heat Treatment of. Imperial Chemical Industries, Ltd., H. Royle and I. H. Morrison, 40
• Bottles, Forged, Production of. V. R. Nicholson, 60
• Butt-Welded Seams. Babcock and Wilcox, Ltd., H. Harris and J. E. Jones, 360
• Metal Mixtures, Separation of Metal from. T. M. Herbert and J. N. Bradley, 220

Miscellaneous :

• Ball Mill. G. Steele and S. D. Cowlishaw, 320
• Bar Members, Structural, Forming. Redpath, Brown and Co., Ltd., and A. Brockbank, 480
• Blower, Roots. Broom and Wade, Ltd., and H. S. Broom, 180
• Building, Portable. Tees Side Bridge and Engineering Works, Ltd., and S. D. Hodgson, 420
• Crane, Bridge-Building. Kryn and Lahy (1928), Ltd., and Prof. C. E. Inglis, 200
• Crushing Apparatus. Shelton Iron, Steel and Coal Co., Ltd., and W. H. Lake, 460
• Excavating Machine. Roadless Traction, Ltd., and P. H. Johnson, 240
• Filter. Wild-Barfield Electric Furnaces Ltd., and G. H. S. Grene, 160
• Gauge, Pressure. Barnet Instruments, Ltd. and C. R. A. Grant, 220
• Glass - Polishing Apparatus. Pilkington Brothers, Ltd., and F. B. Waldron, 140
• Indicator, Engine-Fault. D. Napier and Son, Ltd., and F. R. F. Ramsay, 20
• Metal Sections, De-twisting. Head, Wright- son and Co., Ltd., and N. C. Lake, 500
• Objective, Optical. Taylor, Taylor and Hobson, Ltd., and A. Warmisham, 340
• Oil from Swarf, Recovering. Industrial Utilities (Birmingham), Ltd., L. Mettam and A. Ray, 360
• Optical Measurement of Angles. Precision Grinding, Ltd., H. F. Plant, G. P. Barrott and C. W. True, 40
• Paper Sheets, Cutting and Sorting of. Wiggins, Teape and Co. (1919), Ltd., P. T. Goldney, Strachan and Henshaw, Ltd., and A. G. Hingley, 400
• Riveting Machines, Feeding Mechanism for. Bifurcated and Tubular Rivet Co., Ltd., and L. M. Paterson, 280
• Skiving Machine. E. A. Chamberlain, Ltd., and F. E. J. Vick, 380
• Tiles, Protective, for Underground Cables. H. J. Baldwin and Co., Ltd., and E. V. Byers, 300

Motor Road Vehicles :

• Brake, Internally-Expanding, Kirkstall Forge, Ltd., and F. R. Cowell, 420
• Gas-Producer Set, Vehicle. Sentinel Waggon Works (1936), Ltd., and S. E. Alley, 100
• Lorry Tipping Gear. Sunsaloon Bodies, Ltd., and D. A. Pearson, 520
• Tanks of Road Tankers, Mounting. Scammell Lorries, Ltd., O. D. North and P. G. Pugh, 60 -
• Wing, Rubber. Dunlop Rubber Co., Ltd., and S. Sadler, 180

Railways and Tramways :

• Buffer, Spring. Meboe, Ltd., G. S. Moulton ife Co., Ltd., J. C. G. Cossey and R. T. Glascodine, 200

Ships and Nautical Appliances :

• Launch. British Overseas Airways Corporation, Holt and Chandler, Ltd., H. S. Crabtree and P. L. Chandler, 300

Steam Engines, Boilers, Etc. :

• Superheater, Steam. T. Sugden, Ltd., and A. Hall, 80
• Superheater Support, Arrangement of. Stirling Boiler Co., Ltd., and C. W. Townsend, 140
• Valve, Feed-Water Control. Copes Regulators, Ltd., C. H. Armstrong and N. H Brown, 240

NAMES OF PATENTEES.

• Aero Engines, Ltd., and another. Aero-Engine Supercharger Control, 180
• Alley, S. E., and others. Vehicle Gas-Producer Set, 100
• Amer, D. F., and others. Gas-Blast Circuit Breaker, 220
• Armstrong, C. H., and others. Control Valve, 240
• Aron Electricity Meter, Ltd., Ammeter, 340
• Ashbridge, H. H., and others. Lubricator, 140
• Ashworth, P. B., and others. Elevating Platform Truck, 80
• Automotive Products Co., Ltd., and others. Hydraulic Remote-Control System, 440

• Babcock and Wilcox, Ltd., and others. Butt-Welded Seams, 360
• Baldwin, H. J., and Co., Ltd., and another. Protective Tiles for Underground Cables, 300
• Bamford, A. C., and others. Hydraulic Remote-Control System, 440
• Barback, B., and others. Planing-Machine Feed Mechanism, 360
• Barnet Instruments, Ltd., and another. Pressure Gauge, 220
• Barr, Thomson and Co., Ltd., and another. Valve, 460
• Barrott, G. P., and others. Optical Measurement of Angles, 40
• Beardshall, G., and others. Bomb Carrier for Aircraft, 440
• Bell, W. C., and others. Commutator, 20
• Bennett, R., and another. Pressure-Control System, 80
• Bifurcated and Tubular Rivet Co., Ltd., and another. Feeding Mechanism for Riveting Machines, 280
• Blackburn Aircraft, Ltd., and another. Retractable Wing-Tip Floats, 240
• Bradbury, C. H., and others. Torsional Vibration Damper, 400
• Bradley, J. N., and another. Separation of Metal from Metal Mixtures, 220
• Brierley, W., and others. Airscrew Blade, 340
• Bristol Aeroplane Co., Ltd., and another. Hydraulic Gun Turret, 280
• British Overseas Airways Corporation and others. Launch, 300
• British Ropes, Ltd., and another. Measuring Rope Tensions, 320
• British Tyre and Rubber Co., Ltd., and another. Press-Tool Bolster, 120
• Brockbank, A., and others. Forming Structural Bar Members, 480
• Broom, H. S., and others. Roots Blower, 180
• Broom and Wade, Ltd., and another. Roots Blower, 180
• Brown, N. H., and others. Feed-Water Control Valve, 240
• Burke, P. W., and others. Aircraft Landing Gear, 200
• Byers, E. V., and others. Protective Tiles for Underground Cables, 300

• Chadburn’s (Ship) Telegraph Co., Ltd., and others. Hydraulic Remote-Control System, 440
• Chamberlain, E. A., Ltd., and another. Skiving Machine, 380
• Challen, H. D., and others. Fly-Press Safety Mechanism, 260
• Chandler, P. L., and others. Launch, 300
• Churchill Machine Tool Co., Ltd., and another. Ball-Bearing Lubricator, 140
• Cockburns, Ltd., and others. Torsionmeter, 140
• Colston, C. B., and others. Commutator, 20
• Constant Speed Air Screws, Ltd., and another. De-Icing Apparatus, 40
• Constant Speed Air Screws, Ltd., and others. Direct Cooling of Aircraft Engines, 520
• Coombes, R. J., and others. Brake Mechanism, 300
• Copes Regulators, Ltd., and others. Feed- Water Control Valve, 240
• Cossey, J. C. G., and others. Spring Buffer, 200
• Cowell, F. R., and others. Internally-Expanding Brake, 420
• Cowlishaw, S. D., and another. Ball Mill, 320 Coy, E. R., and others. Grab, 520 Crabtree, H. S., and others. Launch, 300
• C.U.R.A. Patents, Ltd., and another. Gas Producer, 20

• Da Costa, H., and others. Internal-Combustion Engine Starter, 300
• Dannenberg, K., and others. Cartridge Fuse, 260
• de Guerin, J. D. S., and others. Cartridge Starter, 440
• Denny, William, and Brothers, Ltd., and another. Planing-Machine Feed Mechanism, 360
• Dowty Equipment, Ltd., and another. Aircraft Landing Gear, 200
• Dunlop Rubber Co., Ltd., and another. Rubber Wing, 180

• Electric Transmission, Ltd., and another. Cartridge Fuse, 260
• Elliott Brothers (London), Ltd., and another. Moving-Coil Instrument, 120
• Elliott Brothers (London), Ltd., and others. Comparing Alternating Voltages, 480
• England, E. C. G., and System, 400
• Evans, W. N., and others. 120
• Eves, F. S., and others. Control System, 440
• Ewing, A., and another. System, 80

• Finlay Conveyor Co., Ltd., and another. Hydraulic Straightening Machine, 320
• Finlay, R. F., and others. Hydraulic Straightening Machine, 320
• Fowler, John, and Co. (Leeds), Ltd., and another. Compression-Ignition Engine, 60
• Frazer-Nash, A. G., and another. Target-Towing Device, 380

• General Aircraft, Ltd and another. De-Icing System, 400
• Glascodine, R. K., and others. Central Buffer and Draw Gear, 380
• Glascodine, R. T., and others. Spring Buffer, 200
• Goldney, P. T., and others. Cutting and Sorting of Paper Sheets, 400
• Goldup, C. E., and others. Piston Packing, 480
• Gossling, C. E., and others Electric Motor Brush Gear, 320
• Grant, C. R. A., and others. Pressure Gauge, 220
• Grant, T., and others. Torsionmeter, 140 Grene, G. H. S., and others. Filter, 160 Gullick, Ltd., and another. Fluid-Tight Pipe
• Coupling, 240
• G. W. B. Electric Furnaces, Ltd., Continuous Furnace. 420
• G.W.B. Electric Furnaces, Ltd., Nitriding Furnace, 200

• Hadley Co., Ltd., and another. Cartridge Belt Chute, 100
• Hales, J. A., and others. Gas Producers, 20 Hall, A., and others. Steam Superheater, 80
• Halliday, G. F., and others. Aero-Engine Supercharger Control, 180
• Harhen, D. C., and others. Moving-Coil Instrument, 120
• Harris, H., and others. Butt-Welded Seams, 360
• Harvey, V. P., and others. Fuse-Setting Apparatus for Shells, 160
• Hawkes, H. D., and others. Comparing Alternating Voltages, 480
• Head, Wrightson and Co., Ltd., and another. Detwisting Metal Sections, 500
• Herbert, T. M., and another. Separation of Metal from Metal Mixtures, 220
• Hingley, A. G., and others. Cutting and Sorting of Paper Sheets, 400
• Hitchen, H., and others. Measuring Rope Tensions, 320
• Hodges, J. M., and others. Double-Beat Reducing Valve, 340
• Hodgson, S. D., and others. Portable Building, 420
• Holt and Chandler, Ltd., and others. Launch, 300 Hoover, Ltd., and others. Commutator, 20

• Imperial Chemical Industries, Ltd., and others Heat Treatment of Light Alloys, 40
• Industrial Utilities (Birmingham), Ltd., and others. Recovering Oil from Swarf, 360
• Inglis, Prof. C. E., and others. Bridge-Building Crane, 200

• Johnson, P. H., and others. Excavating Machine, 240
• Jones, J. E., and others. Butt-Welded Seams, 360
• Jones, N. W., and others. Preventing Demagnetisation, 180

• Kirkstall Forge, Ltd., and another. Internally- Expanding Brake, 420
• Kryn and Lahy (1928), Ltd., and another. Bridge Building Crane, 200

• Lake, N. C., and others. De-twisting Metal Sections, 500
• Lake, W. H., and others. Crushing Apparatus, 460
• Lewis, E. C., and others. Crucible Melting Pot, 280
• Lister, R. A., and Co., Ltd., and another. Elevating Platform Truck, 80
• Lowe, C. B., and another. Target-Towing Device, 380

• Manlove, Alliott and Co., Ltd., and another. Double-Beat Reducing Valve, 340
• Marshall, F. G., and others. De-Icing Apparatus, 40
• Marshall, F. G., and others. Direct Cooling of Aircraft Engines, 520
• Mawdsley’s, Ltd., and another. Preventing Demagnetisation, 180
• McDonald, J., and others. Continuous Furnace, 420
• McDonald, J., and others. Nitriding Furnace, 200
• McGlasson, R., and others. Direct Cooling of Aircraft Engines, 520
• Meboe, Ltd., and others. Spring Buffer, 200
• Meeson, E. L., and J. I. Diamond Tool, 500
• Mettam, L., and others. Recovering Oil from Swarf, 360
• Molins Machine Co., Ltd., and another. Fuse-
• Setting-Apparatus for Shells, 160
• Morrison, I. H., and others. Heat Treatment of Light Alloys, 40
• Moulton, G. S., and Co., Ltd., and another. Central Buffer and Draw Gear, 380
• Moulton, G. S., and Co., Ltd., and others. Spring Buffer, 200

• Napier, D., and Son, Ltd., and another. Engine- Fault Indicator, 20
• Nicholson, V. R. Production of Forged Bottles, 60
• North, 0. D., and others. Mounting Tanks of Road Tankers, 60

• Paterson, L. M., and others. Feeding Mechanism for Riveting Machines, 280
• Pearson, D. A., and others. Lorry Tipping Gear, 520
• Petch, H. S., and others. Comparing Alternating Voltages, 480
• Pilkington Brothers, Ltd., and another. Glass- Polishing Apparatus, 140
• Plant, H. F., and others. Optical Measurement of Angles 40
• Plessey and Co., Ltd., and another. Internal-Combustion Engine Starter, 300
• Ponting, R., and others. Hydraulic Gun Turret, 280
• Precision Grinding, Ltd., and others. Optical Measurement of Angles, 40
• Pugh, P. G., and others. Mounting Tanks of Road Tankers, 60
• Pultra, Ltd., and others. Tool Holder for Machine Tools, 520

• Ramsay, F. R. F., and others. Engine-Fault Indicator, 20
• Ray, A., and others. Recovering Oil from Swarf, 360
• Redpath, Brown and Co., Ltd., and another. Forming Structural Bar Members, 480
• Reid, J. L., and others. Valve, 460
• Rennie, J. D., and others. Retractable Wing- Tip Floats, 240
• Reyner, J. H. Magnetising Apparatus, 460
• Reyrolle, A., and Co., Ltd., and another. Gas- Blast Circuit Breaker, 220
• Riordan, E. J., and others. Ammeter, 340
• Roadless Traction, Ltd., and another, vating Machine, 240
• Rodger, J., and others. Torsionmeter,
• Roe, A. V., and Co., Ltd., and another. Carrier for Aircraft, 440
• Rosser, G. D., and others. Machine-Gun Cartridge Belt Chute, 100
• Rotax, Ltd., and another. Cartridge Starter, 440
• Rotol Airscrews, Ltd., and another. Airscrew Blade, 340
• Royle, H., and others. Heat Treatment of Light Alloys, 40
• Ruston and Hornsby, Ltd., and another. Torsional Vibration Damper, 400

• Sadler, S., and others. Rubber Wing, 180
• Sanders, A. F., and others. Compression- Ignition Engine, 60
• Scammell Lorries, Ltd., and others. Mounting Tanks of Road Tankers, 60
• Schettler, G. A., and others. Hydraulic Press, 100
• Scott, G. A., and others. Continuous Heating Furnace, 160
• Scott, W. Soldering Iron, 500
• Seaman, T., and others. Fluid-Tight Pipe Coupling, 240
• Sentinel Waggon Works (1936), another. Vehicle Gas-Producer Shaw, F. Mi., and others. Tool
• Machine Tools, 520
• Shelton Iron, Steel and Coal Co., another. (Crushing Apparatus, 460
• Small Electric Motors, Ltd., and another. Electric Motor Brush Gear, 320
• Stanhav, Ltd., and another. Piston Packing, 480 *
• Steele, G., and another. Ball Mill, 320 Stirling Boiler Co., Ltd., and another.
• ment of Superheater Support, 140 Stone, J. and Co., Ltd., and another.
• Melting Pot, 280
• Stothert and Pitt, Ltd., and another. Mechanism, 300
• Strachan and Henshaw, Ltd., and others. Cutting and Sorting of Paper Sheets, 400
• Sugden, T., Ltd., and another. Steam Superheater, 80
• Sunsaloon Bodies, Ltd., and another. Lorry Tipping Gear, 520

• Taylor, A. E., and others. Cleaning Producer Gases, 120
• Taylor and Challen, Ltd., and another. Fly-Press Safety Mechanism, 260
• Taylor, Taylor, and Hobson, Ltd., and another. Optical Objective, 340
• Tees Side Bridge and Engineering Works, Ltd., and another. Portable Building, 420
• Thompson, John, Water-Tube Boilers, Ltd., and another. Stepped-Grate Furnace, 260
• Thornton, P. P., and others. Tool Holder for Machine Tools, 520
• Townsend, C. W., and others. Arrangement of Superheater Support, 140
• True, C. W., and others. Optical Measurement of Angles, 40
• Turner Tanning Machinery Co., Ltd., and another. Hydraulic Press, 100

• United Steel Companies, Ltd., and another. Grab, 520

• Vick, F. E. J., and others. Skiving Machine, 380

• Waldron, F. B., and others. Glass-Polishing Apparatus, 140
• Walker, A. W. E., and others. Stepped-Grate Furnace, 260
• Warmisham, A., and others. Optical Objective, 340
• Wellman Smith Owen Engineering Corporation, Ltd., and another. Continuous Heating Furnace, 160
• Whessoe Foundry and Engineering Co., Ltd., and another. Cleaning Producer Gases, 120
• Wiggins, Teape and Co. (1919), Ltd., and others. Cutting and Sorting of Paper Sheets, 400
• Wild-Barfield Electric Furnaces, Ltd., and another. Filter, 160

See Also

Loading...