Villiers
Villiers Engineering Co Ltd was a manufacturer of motorcycles and cycle parts, and an engineering company based in Villiers Street, Wolverhampton.
of Marston Road, Wolverhampton. Telephone: 21666/7/8. Telegraphic Address: "Villiers, Wolverhampton". (1937)
General
1880s John Marston's Sunbeam cycle had become extremely successful, by relying on high quality of production and finish. But Marston was dissatisfied with the pedals on his machines, which he bought in.
In 1890, he dispatched his son Charles Marston to the USA on a selling trip but included in his instructions that he must discuss pedal engineering with Pratt and Whitney in Hartford, Connecticut and come back with a high class pedal and the machinery for making it. Charles has said that the Villiers Engineering Co was "the ultimate fruit" of his trip to the USA. He was impressed by the production system and the labour saving devices he saw there. He pointed out that "it was not possible to develop these at Sunbeamland, which had long been working on another plan, but it was possible to start them in a new factory".
1898 As a result of the tour John Marston bought a small Japanning works in Villiers Street, Wolverhampton, that had belonged to Edward Bullivant. Under the direction of Charles, the new company made cycle parts for the Sunbeam cycle. As the factory was producing more parts than Sunbeam required, Villiers also sold components to other manufacturers.
Frank Farrer, who was then the manager of the Palmer Tyre's Coventry depot, was appointed as sole agent for the sale of the surplus pedals. Farrer had many connections with the cycle trade, was a good engineer and a great salesman and was to become the driving force in Villiers. So successful was this move that Frank Farrer joined Villiers full time in 1902; the factory employed 36 men.
1902 John Marston sold the company to his son Charles for £6,000 on a loan against future profits. Secondly, it developed and patented the cycle free-wheel, which every cycle manufacturer required. The production of free wheels reached its peak just after World War II, as the company produced 80,000 per week or 4 million per year.
1912 Early in the year they introduced their first motor cycle engine, an inlet over exhaust 350cc four stroke with a built in two speed gearbox and clutch but it was considered too complex and was not a success.
1912 At the end of the year they introduced their first two-stroke engine with a 269cc unit. This engine was designated the Mark I and given the code 'O'. The cylinder had a fixed head and the bearings for the crankshaft and small end were made of phosphor-bronze while the big end a roller bearing. The piston was a deflector head type made in cast iron. The exhaust pipe and expansion box were made in aluminium. The lubrication system was by hand pump from the oil tank, which was built alongside the petrol tank. The oil was passed through a drilled front crankcase bolt into the crankcase where oil-ways fed it to the bearings. Surplus oil was splashed onto the walls where it was picked up by the incoming petrol vapour and taken to the upper cylinder.
1912 Situated on a half acre site and employed 20 men
1914 Listed under Cycle Manufacturers as Villiers Cycle Co and under Cycle Fittings Manufacturers as Villiers Cycle Component Co both of Upper Villiers Street [1]
WWI Produced munitions
1916 Introduced the Mark II with changes to the exhaust system which was now made in steel and in the method of holding the exhaust to the cylinder
After the war, Villiers engines were supplied to: Atco Mowers, Clifford Cultivators, Howard Rotavator, Sun motorcycles, James motorcycles, Greeves motorcycles, Francis-Barnett motorcycles, Norman motorcycles, Ambassador motorcycles, DKR motorcycles, DMW motorcycles, Dot motorcycles and Panther motorcycles.
1919 Charles Marston stepped back from the day to day management of the company. He remained as Chairman but appointed Frank Farrer as Managing Director.
1920 Introduced the Mark III with improvements to the exhaust, the driving shaft altered and the crankcase and bushes modified. The outside flywheel was made with a separate centrepiece which could be changed to allow for pulley or sprocket usage
1921 Introduced the Mark IV with a change in the driving shaft that enabled the flywheel magneto to be fitted
1922 Introduced the Mark IV with flywheel magneto
1925 Produced its own carburettor
1926 Acquired the Mills Carburettor Co
1926 Produced three prototype cars but after this the project was dropped
1928 Public company.
1933 Introduced a stationary engine of 2.5 hp
1933 Introduced the Marvil air-cooled two-stroke stationary engine rated at 0.6 hp at 1,750 rpm
1935 Produced the Pygmylite generator units
1937 Listed Exhibitor - British Industries Fair. "Villiers" Stationary Engines from ½ hp to 4hp, for industrial purposes.A full range of Steel Stamping and Non-Ferrous Castings. "Villiers" Cycle Products, including Freewheels, Speed Gears, and "Villiers" Motor Cycle Engines. (Stand Nos. D.825 and D.724) [2]
1937 Manufacturers of two-stroke engines and accessories. "Villiers" Two-stroke Engines and Accessories. [3]
1956 Villiers produced its two millionth engine and presented it to the Science Museum in London.
1956 The company was on a 17 acre site and employed 3,500 persons
1957 Villiers absorbed J. A. Prestwich Industries Ltd, makers of the JAP engines.
1961 Manufacturers of internal combustion engines, including the "Villiers" two-stroke and four-stroke light internal combustion engine. Also manufacture cycle components, freewheels, magnetos, and carburettors. [4]
1962 The company was claiming that: "jointly, the two companies produce a vast range of two-stroke and four-stroke petrol engines and four-stroke diesel engines from 1/3rd to 16 b.h.p. These are the engines which power many of Britain's two-stroke motorcycles, scooters and three-wheelers and the great majority of the motor mowers, cultivators, concrete mixers, generating sets, elevators, pumping sets. etc."
1965 The company was taken over by Manganese Bronze Holdings.
1966 Together with AMC, the company became part of Norton-Villiers. At this point, Villiers stopped supplying engines to outside companies. Production of the Villiers engine closed in the UK, but continued in Madras, India.
1966 Villiers Tool Development Ltd renamed Viltool Ltd at Wednesfield, Shropshire, specialising in transfer machinery for production lines; turnover had doubled in a year[5].
1968 Manganese Bronze Holdings sold its 70 percent interest in Viltool[6] to the Snyder subsidiary of the Synder Corporation of the USA[7].
In 1999 Villiers Plc acquired the healthcare company Ultramind and renamed the company Ultrasis.
Models
- WX11 1927/28 Introduced the WX11 stationary engine rated at 1.5 bhp
- Mk25 1941 Four-cycle side-valve 250cc rated at 3 bhp
- Mk20. 1941 Introduced the Mk20 200cc engine.
- Mk10. 1941 98cc
- Mk12. 1941 120cc
- MK40. 1950 Introduced the Mk40 385cc engine
- Mk15. 1953 Introduced the Mk15 (147cc) engine
See Also
Sources of Information
- ↑ 1914 Wolverhampton Red Book and Directory
- ↑ 1937 British Industries Fair p429
- ↑ 1937 The Aeroplane Directory of the Aviation and Allied Industries
- ↑ 1961 Dun and Bradstreet KBE
- ↑ The Times, 20 January 1967
- ↑ The Times, 18 May 1968
- ↑ The Times, Thursday, Jun 20, 1968
- [1] Wikipedia
- [2] Ian Chadwick's motorcycle web site
- [3] Cyber Motor Cycles web site
- [4] Made in Birmingham
- [5] The Villiers Engineering Company - A Short History of the Company
- [6] The Villiers Engineering Company - From Bike Parts to Engines
- [7] Wolverhampton History
- Powered Vehicles made in the Black Country by Jim Boulton and Harold Parsons. Published 1990. ISBN 0 904015 30 0